An extremely corrosion-resistant superalloy composed of nickel and chromium is alloy 825. The alloy's microstructure is stable and contains enough nickel to prevent corrosion cracking from chloride ions. The inclusion of copper and molybdenum in the composition results in resistance to acids and inducing chemicals. Because of the additional chromium content, the Incoloy 825 UNS N08825 is additionally resistant to oxidation, nitrates, and oxidising salts. Intergranular precipitation could not develop during welding or heating of the alloy within the key sinsitization temperature range of 650 to 760 degrees Celsius. This is made feasible by the stabilising effect of titanium's inclusion in the mixture. Due to its resistance to phosphoric and sulfuric acid corrosion, the designation DIN 2.4858 is most frequently used in sulfuric acid service applications. The material has a superior hardness of Incoloy 825 and is solid solution annealed. The material could be utilised in high temperature applications like jet engines and turbine blades because of the toughness that the Incoloy 825 chemical composition and heat treatment techniques provide. Because of Incoloy 825's characteristics, it can be utilised in pressure vessels that must withstand high pressures and be robust and durable. The density of Incoloy 825 is 8.14 grammes per centimetre cube, and its melting point is 1400 degrees Celsius.
| Pipe Smls | Sheet/ Plates | Forging | Pipe Fittings | Bars | Pipe Welded | Tube Smls | Tube Welded |
|---|---|---|---|---|---|---|---|
| B423 | B424 | B564 | B366, B564 | B425 | - | - | - |
Common Trade Names: Nickel 825, Incoloy 825, Nickelvac 825, Alloy 825, Nicrofer 4241
NACE MR-0175/ ISO 15156
FMC Spec: M40116, M41104, M40154
| STANDARD | WERKSTOFF NR. | UNS | BS | GOST | OR | JIS | AFNOR | EN |
|---|---|---|---|---|---|---|---|---|
| Incoloy 825 | 2.4858 | N08825 | NA 16 | ЭП703 | XH38BT | NCF 825 | NFE30C20DUM | NiCr21Mo |
INCOLOY alloy 825 Temperature Range is 1600 to 2150 Degree F (870 to 1180 Degree C).
| Element | Density | Yield Strength (0.2%Offset) | Melting Point Range | Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Incoloy 825 | 8.14 g/cm3 | Psi – 32,000 , MPa – 220 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | 30 % |
| Ni | Ti | Fe | S | Mb | Cr | Cu | C | Mn | Si | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 38.0-46.0 | .6-1.2 | 22.0 min | 0.03 max | 2.5-3.5 | 19.5-23.5 | 1.5-3.0 | 0.05 max | 1.0 max | 0.5 max | 0.2 max |
Inconel round bar of the highest calibre is offered by Sterling Metal and Alloys, a prominent supplier in the market. We provide our customers with products of exceptional quality at competitive prices, with short delivery times and flawless standard specifications. It is offered in compliance with both international and national quality requirements. We provide Inconel round bars in a variety of grades, including Incoloy 825. We also provide round bars in other Inconel and Incoloy categories.
It is an alloy of nickel, iron, and chromium with trace quantities of molybdenum, copper, and titanium. Due to its chemical makeup, it has excellent resistance to a variety of corrosive environments, including stress corrosion cracking, pitting, and intergranular and crevice corrosion. With a heated operating range of 1600 to 2150ºF, it has good mechanical qualities from common to high temperature. Additionally, it keeps up strong weldability across all common processes.
| Grade | Incoloy 825 |
|---|---|
| Standard | ASTM B446 |
| Size | 5 mm to 500 mm dia, 100 mm to 6000 mm length or as per requirement |
| Finish | Cold (bright) drawn. centerless ground, hot rolled. smooth turned. peeled, slit rolled edge, hot rolled annealed. Rough Turned, Bright. Polish, Grinding. Centerless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13Kg. K10. K11. K12 or as per clients' requirements |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished. Cold Drawn, Hairline. Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Cold Drawn, Hot Rolled. Forged. Cold Rolled |
| Payment terms/terms and conditions | For Export Sales - 50% advance along with the order, balance 50% against Scanned Copy of B/L. For Domestic Sales - 100% Advance against Performa Invoice or Letter of Credit |
| Packaging | Shrink wrap, jute gunny, plastic film, bubble - wrapping including wooden boxes and cardboard tube packaging. For quick product identification custom painted bundle end colors |
One of the biggest producers of square bars in India is Sterling Metal and Alloys; its robust construction and precise dimensions make it a popular choice for a wide range of industrial uses. Being one of the top producers of stainless steel square bars in India, we constantly make sure to offer the highest calibre goods at the most competitive costs.
| Grade | Incoloy 825 |
|---|---|
| Standard | ASTM B446 |
| Size | 5 mm to 500 mm dia, 100 mm to 6000 mm length or as per requirement |
| Finish | Cold (bright) drawn. centerless ground, hot rolled. smooth turned. peeled, slit rolled edge, hot rolled annealed. Rough Turned, Bright. Polish, Grinding. Centerless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13Kg. K10. K11. K12 or as per clients' requirements |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished. Cold Drawn, Hairline. Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Cold Drawn, Hot Rolled. Forged. Cold Rolled |
| Payment terms/terms and conditions | For Export Sales - 50% advance along with the order, balance 50% against Scanned Copy of B/L. For Domestic Sales - 100% Advance against Performa Invoice or Letter of Credit |
| Packaging | Shrink wrap, jute gunny, plastic film, bubble - wrapping including wooden boxes and cardboard tube packaging. For quick product identification custom painted bundle end colors |
Hex bars are manufactured in India by Sterling Metal and Alloys, who can supply them in a range of materials, grades, sizes, and standards in excellent quality to meet the demands and satisfy clients.
The product known as hexagonal stainless steel bar gets its name from its six sides, which are produced by heated steel that is passed through rollers. It is shaped specifically for objects or machinery that require precise parts. The majority of the time, conveyor tables use it.
| Grade | Incoloy 825 |
|---|---|
| Standard | ASTM B446 |
| Size | 5 mm to 500 mm dia, 100 mm to 6000 mm length or as per requirement |
| Finish | Cold (bright) drawn. centerless ground, hot rolled. smooth turned. peeled, slit rolled edge, hot rolled annealed. Rough Turned, Bright. Polish, Grinding. Centerless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13Kg. K10. K11. K12 or as per clients' requirements |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished. Cold Drawn, Hairline. Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Cold Drawn, Hot Rolled. Forged. Cold Rolled |
| Payment terms/terms and conditions | For Export Sales - 50% advance along with the order, balance 50% against Scanned Copy of B/L. For Domestic Sales - 100% Advance against Performa Invoice or Letter of Credit |
| Packaging | Shrink wrap, jute gunny, plastic film, bubble - wrapping including wooden boxes and cardboard tube packaging. For quick product identification custom painted bundle end colors |
These pipes are available in various sizes and grades from vendors of Incoloy 825 Pipe. Depending on the pipe's diameter, wall thickness, and pressure classes, the specifications range from B407 to SB515. The sizes range from 15NB to 150NB, contingent upon the specifications of the intended use. Oil refineries and petroleum processing plants are examples of larger industrial uses that call for larger scale. Conversely, smaller pipes would be needed for engine components like those used in jet engines. The Inconel Alloy 825 Seamless Pipe is more precisely dimensioned and drawn seamless. Additionally, ERW, welded, fabricated, and LSAW conditions could be used to make the pipe. Stronger welding techniques are made possible by UNS N08825 Welded Pipe.
| Standard Specifications | ISO 6207 ASME SB 829, ASME SB 704, ASTM B 705, ASME SB 751, ASME SB 423, DIN 17751, ASME SB 163, ASME Code Case 1936, VdTÜV 432, BS 3074NA16, ASTM B 704, ASTM B 423, ASME SB 775, ASTM B 829, ASTM B 775, ASTM B 163, ASME SB 705, ASTM B 751 |
|---|---|
| Dimensions | ASME B36.10M or B36.19M |
| Seamless ASTM B423 N08825 | 4 to 219mm W. T.: 0.5 to 20mm |
| Welded / ERW 825 Pipes | 5.0 - 1219.2 mm |
| Ranging in size from | 15 - 150" NB IN |
| Schedule Chart | SCH5, SCH10, SCH40, STD, SCH80, SCH120, SCH160 |
| Basic types | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Available Forms | Round, Hydraulic Etc |
| End Abbreviations | Plain End, Beveled End, TOE, BOE, BLE, BSE, TBE, PBE, BBE, BE, POE, BOE, |
| Test | NACE MR0175 |
| DIN Werkstoff nr. | 2.4858 |
| UNS designation | N08825 |
| EN European standards | NiCr21Mo |
| AFNOR UK | NFE30C20DUM |
Inconel 825 Sheets and Plates represent a pinnacle of engineering excellence, designed to excel in demanding and corrosive environments. Comprising a nickel-iron-chromium alloy with the addition of molybdenum, copper, titanium, and aluminum, Inconel 825 exhibits outstanding resistance to a diverse range of corrosive media, including sulfuric and phosphoric acids, as well as chloride-containing environments. With a density of 8.14 g/cm³ and a formidable melting point of 1,370°C (2,498°F), these sheets and plates offer robust mechanical properties. Featuring a minimum tensile strength of 550 MPa (80 ksi) and a minimum yield strength of 220 MPa (32 ksi), accompanied by a minimum elongation of 30%, Inconel 825 ensures both strength and ductility for a wide array of applications. The alloy's exceptional corrosion resistance extends to both reducing and oxidizing environments, making it a material of choice for critical applications in chemical processing, pollution control, oil and gas, and nuclear industries. Notably, Inconel 825 demonstrates resilience against stress corrosion cracking and pitting, contributing to its reliability in challenging conditions. These sheets and plates are adept at withstanding temperatures up to 870°C (1,600°F), further expanding their utility in high-temperature applications. Whether used in heat exchangers, chemical reactors, or desulfurization systems, Inconel 825 Sheets and Plates meet and exceed industry standards, adhering to specifications such as ASTM B424 and ASME SB424. In conclusion, Inconel 825 Sheets and Plates embody a harmonious fusion of corrosion resistance, mechanical strength, and high-temperature stability, making them indispensable components in industries where reliability and durability are paramount.
| Property | Inconel 825 |
|---|---|
| Material | Inconel 825 |
| Composition | Ni 38-46%, Fe 22% min, Cr 19.5-23.5%, Mo 2.5-3.5%, Cu 1.5-3%, Mn 1% max, Ti 0.6-1.2%, Al 0.2% max, C 0.05% max, S 0.03% max, Si 0.5% max |
| Density | 8.14 g/cm³ |
| Melting Point | 1,370°C (2,498°F) |
| Tensile Strength | Min. 550 MPa (80 ksi) |
| Yield Strength | Min. 220 MPa (32 ksi) |
| Elongation | Min. 30% |
| Corrosion Resistance | Excellent in acidic and corrosive environments |
| Temperature Resistance | Up to 870°C (1,600°F) |
| Pressure Rating | Dependent on design and application |
| Applications | Chemical processing, pollution control, oil and gas, nuclear |
| Forms | Sheets, Plates |
| Standards | ASTM B424, ASME SB424 |
Inconel 825 fasteners exemplify the remarkable properties of this nickel-iron-chromium alloy, designed for exceptional corrosion resistance in diverse and challenging environments. Composed primarily of nickel, with significant additions of chromium, iron, and molybdenum, Inconel 825 stands out for its resistance to both reducing and oxidizing acids. These fasteners, conforming to ASTM B425 standards, are customizable in size and exhibit a range of finishes, including plain, black, zinc-plated, and hot-dip galvanized, enhancing their versatility for different applications. With thread types such as UNC, UNF, Metric Coarse, and Metric Fine, they cater to a variety of industrial needs. In terms of mechanical performance, Inconel 825 fasteners boast a tensile strength of a minimum 80 ksi (550 MPa) and a yield strength of at least 30 ksi (205 MPa), ensuring robust and reliable connections. Eligible under ASTM B425, these fasteners are particularly renowned for their outstanding corrosion resistance, making them suitable for applications in chemical processing, pollution control, oil and gas, and various corrosive environments. Their impressive temperature range of -60°C to 450°C (-76°F to 842°F) further underscores their suitability for applications requiring performance in extreme temperature conditions. Inconel 825 fasteners play a critical role in ensuring the structural integrity and longevity of assemblies exposed to aggressive chemical and corrosive atmospheres. In summary, Inconel 825 fasteners are a testament to advanced metallurgy, offering a combination of mechanical strength, corrosion resistance, and temperature stability. Whether in chemical plants or oil refineries, these fasteners provide a reliable solution for critical applications demanding durability in the face of harsh and corrosive elements.
| Property | Value |
|---|---|
| Material | Inconel 825 |
| Size Range | Customizable |
| Standard | ASTM B425 |
| Grade | UNS N08825 |
| Finish | Plain, Black, Zinc Plated, Hot Dip Galvanized, etc. |
| Thread Type | UNC, UNF, Metric Coarse, Metric Fine, etc. |
| Tensile Strength | Minimum 80 ksi (550 MPa) |
| Yield Strength | Minimum 30 ksi (205 MPa) |
| Eligibility | ASTM B425 |
| Corrosion Resistance | Excellent resistance to corrosive environments |
| Applications | Chemical processing, pollution control, oil and gas, etc. |
| Temperature Range | -60°C to 450°C (-76°F to 842°F) |
One of the top providers of Inconel fittings is Sterling Metal and Alloys; it comes in both conventional and non-standard sizes. We are well known for being suppliers of the whole line of Inconel pipe fittings. With a high nickel content that is sufficient to withstand chloride ion stress corrosion cracking and a very stable austenitic structure, Incoloy 825 pipe fittings exhibit exceptional corrosion resistance. Copper and molybdenum aid in the alloy's ability to withstand acids and reducing agents. Chromium provides oxidising resistance against nitrates, oxidising salts, and nitric acid solutions. After fabrication, particularly welding, it is stabilised with titanium to withstand pitting and intergranular assault. This stabilisation process involves heating the material to a critical sensitization temperature range of 650°C to 760°C.
| Equivalent Grade | Incoloy 825. Alloy 825. UNS N08825 |
|---|---|
| Specifications | ASTM B366/ASME SB366 |
| Size | 3½"NB to 24"NB in SCH 10s. 40s, 80s. 160s, XXS. |
| Dimension | ANSI/ASME B16.9. B16.28. MSS-SP-43- |
| Schedule | SCH 10. 20, 40. STD. 60. 80. XS |
| Type | Seamless / Welded / Fabricated |
| Coating | Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized |
| Manufacturing Technique | Forged/ Heat treated and machined |
| Marking | Manufacturer logo. ASTM code. Material grade. Size, Thickness. Heat No. or as per customer's requirement |
| Production capability | 100 tons |
| Payment terms/ terms and conditions | For Export Sales - 50% Advance along with the Order. Balance 50% against Scanned Copy of B/L. For Domestic Sales - 100% Advance against Performa Invoice or Letter of Credit |
| Testing | 1. Hydro test. 2. Proof test, 3. Non-destructive test-(ultrasonic. radiography. liquid penetrant test. magnetic particle test. positive material identification). 4. Destructive test-(proof test. tensile test. impact test, hardness test). 5. Metallurgical test - micro or chemical analysis, macro analysis. 6. Special tests (intergranular corrosion test, hydrogen induced cracking, and 7. Visual Inspection |
| Test Certificates | EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report. Third Party Inspection Report, etc. |
| Packaging | Bundle. Plastic Cap Plugged, Waterproof Wrapped. Anti-tarnish paper and plastic bag Wooden Pallet and Boxes |
| Value Added Services | In house PMI testing with export quality packaging |
Inconel 825 Flushing Rings epitomize advanced engineering for applications demanding exceptional corrosion resistance and high-temperature stability. Composed primarily of nickel, iron, and chromium, with additional elements such as molybdenum, copper, and titanium, Inconel 825 offers unparalleled performance in corrosive environments. These flushing rings are designed to prevent contamination and ensure optimal fluid flow in critical industrial processes. The alloy's unique composition contributes to its exceptional resistance to a wide range of corrosive media, including sulfuric and phosphoric acids, making Inconel 825 Flushing Rings vital components in chemical processing, petrochemical, and oil and gas industries. These rings provide a robust solution for maintaining the integrity of fluid handling systems, safeguarding against the detrimental effects of corrosion and ensuring long-term reliability. Inconel 825 Flushing Rings exhibit high-temperature stability, making them suitable for applications in heat exchangers, reactors, and pipelines where exposure to elevated temperatures is a constant. The flushing rings' resistance to stress corrosion cracking and pitting further enhances their reliability in demanding conditions. Crafted with precision, Inconel 825 Flushing Rings demonstrate excellent weldability and fabricability, allowing for easy installation and customization according to specific project requirements. Their durability and resistance to thermal cycling contribute to their longevity and consistent performance in challenging industrial environments. In summary, Inconel 825 Flushing Rings stand as integral components, embodying a perfect synergy of corrosion resistance, high-temperature stability, and mechanical robustness. Their application ensures the efficiency and longevity of fluid handling systems in critical processes where the prevention of contamination is paramount.
| Property | Inconel 825 Flushing Rings |
|---|---|
| Material | Inconel 825 |
| Composition | Ni 38-46%, Fe 22% min, Cr 19.5-23.5%, Mo 2.5-3.5%, Cu 1.5-3%, Mn 1% max, Ti 0.6-1.2%, Al 0.2% max, C 0.05% max, S 0.03% max, Si 0.5% max |
| Temperature Range | Up to 870°C (1,600°F) |
| Corrosion Resistance | Excellent in acidic and corrosive environments |
| Applications | Chemical processing, petrochemical, oil and gas |
| Prevention | Prevents contamination and ensures optimal fluid flow |
| Resistance | Resistance to stress corrosion cracking and pitting |
| Weldability | Excellent |
| Fabricability | Excellent |
| Standards | ASTM B424, ASME SB424 |
Inconel 825 Forged Thermowells exemplify cutting-edge engineering for applications demanding exceptional corrosion resistance and high-temperature stability. Comprising a nickel-iron-chromium alloy enriched with molybdenum, copper, and titanium, Inconel 825 demonstrates remarkable performance in corrosive environments, making it an ideal choice for industries such as chemical processing, petrochemical, and oil and gas. Forged thermowells play a crucial role in protecting temperature sensors and ensuring accurate temperature measurement in challenging industrial processes. Inconel 825's unique composition grants it resistance to a wide range of corrosive media, including sulfuric and phosphoric acids, providing long-lasting reliability in extreme conditions. The alloy's ability to resist stress corrosion cracking and pitting further enhances its suitability for critical applications. Crafted with precision through the forging process, Inconel 825 Forged Thermowells offer excellent creep resistance, maintaining structural integrity under prolonged exposure to high temperatures. Their pressure rating, dependent on design and application, ensures compatibility with diverse industrial systems. The thermowells' weldability and fabricability contribute to easy installation and customization, allowing for precise adaptation to specific project requirements. Whether utilized in chemical reactors, pipelines, or heat exchangers, Inconel 825 Forged Thermowells stand as robust components, combining corrosion resistance, high-temperature stability, and mechanical strength to ensure the accuracy and reliability of temperature measurements in critical processes. In summary, these thermowells represent a vital solution for industries where precision and durability are paramount.
| Property | Inconel 825 Forged Thermowell |
|---|---|
| Material | Inconel 825 |
| Composition | Ni 38-46%, Fe 22% min, Cr 19.5-23.5%, Mo 2.5-3.5%, Cu 1.5-3%, Mn 1% max, Ti 0.6-1.2%, Al 0.2% max, C 0.05% max, S 0.03% max, Si 0.5% max |
| Temperature Range | Up to 870°C (1,600°F) |
| Creep Resistance | Excellent |
| Pressure Rating | Dependent on design and application |
| Applications | Chemical processing, petrochemical, oil and gas |
| Features | Provides protection to temperature sensors, ensures accurate temperature measurement |
| Resistance | Resistance to stress corrosion cracking and pitting |
| Weldability | Good |
| Fabricability | Excellent |
| Standards | ASTM B424, ASME SB424 |
Inconel 825 Forged Circles are advanced engineering marvels crafted from a nickel-iron-chromium alloy, fortified with essential elements such as molybdenum, copper, and titanium. These circles showcase exceptional resistance to corrosion and high-temperature stability, making them indispensable in industries where durability and reliability are paramount, such as chemical processing, petrochemical, and oil and gas. Forged circles derived from Inconel 825 exhibit superior mechanical strength, ensuring robust performance under challenging conditions. Their unique composition grants them resistance to a spectrum of corrosive media, including acids and chloride-containing environments, making them ideal for critical applications. The forging process enhances the structural integrity of these circles, making them well-suited for applications where extended exposure to high temperatures is commonplace. Inconel 825 Forged Circles, with their high-temperature stability, find utility in heat exchangers, chemical reactors, and other demanding industrial equipment. Apart from their impressive corrosion resistance and thermal stability, these circles also offer excellent weldability and fabricability, facilitating easy installation and customization. This adaptability ensures precise integration into specific project requirements, further enhancing their versatility. In conclusion, Inconel 825 Forged Circles stand as resilient components, embodying a harmonious balance of corrosion resistance, high-temperature stability, and mechanical robustness. Their application ensures the efficiency and longevity of industrial processes, contributing to the reliability and precision required in critical applications.
| Property | Inconel 825 Forged Circle |
|---|---|
| Material | Inconel 825 |
| Composition | Ni 38-46%, Fe 22% min, Cr 19.5-23.5%, Mo 2.5-3.5%, Cu 1.5-3%, Mn 1% max, Ti 0.6-1.2%, Al 0.2% max, C 0.05% max, S 0.03% max, Si 0.5% max |
| Mechanical Strength | Robust |
| Temperature Stability | High |
| Corrosion Resistance | Excellent |
| Applications | Chemical processing, petrochemical, oil and gas |
| Forging Process | Enhanced structural integrity |
| Weldability | Good |
| Fabricability | Excellent |
| Standards | ASTM B424, ASME SB424 |
Inconel 825 Gaskets represent a pinnacle of engineering excellence, designed for critical applications where corrosion resistance and high-temperature stability are paramount. Composed of a nickel-iron-chromium alloy with additional elements such as molybdenum, copper, and titanium, Inconel 825 exhibits remarkable resistance to a diverse range of corrosive media, including acids and chloride-containing environments. These gaskets play a vital role in maintaining leak-tight seals in chemical processing, petrochemical, and oil and gas industries, where the prevention of fluid or gas escape is crucial. Inconel 825's unique composition provides robust mechanical strength, ensuring reliable sealing performance even in challenging conditions. The exceptional corrosion resistance of Inconel 825 Gaskets extends to both oxidizing and reducing environments, making them suitable for applications prone to harsh chemical exposure. Additionally, the gaskets exhibit resistance to stress corrosion cracking and pitting, further enhancing their reliability in demanding industrial processes. Crafted with precision, Inconel 825 Gaskets are designed to withstand high temperatures, making them ideal for applications in heat exchangers, reactors, and pipelines. Their weldability and fabricability contribute to easy installation and customization, allowing for precise adaptation to specific project requirements. In summary, Inconel 825 Gaskets serve as critical components, embodying a harmonious blend of corrosion resistance, high-temperature stability, and mechanical integrity. Their application ensures the efficiency and longevity of industrial processes in challenging environments where sealing performance is of utmost importance.
| Property | Inconel 825 Forged Circle |
|---|---|
| Material | Inconel 825 |
| Composition | Ni 38-46%, Fe 22% min, Cr 19.5-23.5%, Mo 2.5-3.5%, Cu 1.5-3%, Mn 1% max, Ti 0.6-1.2%, Al 0.2% max, C 0.05% max, S 0.03% max, Si 0.5% max |
| Mechanical Strength | Robust |
| Temperature Stability | High |
| Corrosion Resistance | Excellent |
| Applications | Chemical processing, petrochemical, oil and gas |
| Forging Process | Enhanced structural integrity |
| Weldability | Good |
| Fabricability | Excellent |
| Standards | ASTM B424, ASME SB424 |
| Countries We Export | |||
|---|---|---|---|
| Saudi Arabia | Oman | Kuwait | Bahrain |
| Qatar | UAE | Iran | Netherland |
| Nigeria | Mexico | Canada | Bangladesh |
| The United States | South Africa | Malaysia | Brazil |
| Singapore | Sri Lanka | Australia | Turkey |
